IR Hot Drying Tunnel Blet Drying Machine for Glass Screen Printing Machine Suppliers

Introduction

The tunnel dryer does not have multiple heaters in the upper and lower sections of the tunnel body. A windshield is fixed on the front side of each skip to separate adjacent carts. The hot air passes vertically through the material layer and is reversed multiple times. The temperature of the hot air can be controlled in stages.

There is another type of through-flow drying equipment in which two tunnels are juxtaposed, and several drying sections are arranged along the longitudinal direction of the whole tunnel. An axial fan is installed in the upper part of each drying section of the two columns of tunnels, so that the hot air passes through the two columns in the section. At the same time, a material layer of the tunnel is input with a certain amount of outside air, and a certain amount of exhaust gas is discharged to perform partial exhaust gas recirculation.

Characteristics

• Drying of flake, strip, block or granules;
• Especially suitable for dehydrated vegetables, Chinese Herbal Pieces and other materials with high moisture content and high material temperature;
• Dry cakes may be dried after pelleting or sticking;
• The series dryer has the advantages of fast drying speed, high evaporation intensity and good product quality.